MPET Series Zinc Alloy Quick Connection T-Type Pneumatic Fitting

Product Details
Customization: Available
Customized: Non-Customized
Number of Cylinders: 8
Still deciding? Get samples of US$ 0.3/Piece
Request Sample
Manufacturer/Factory, Trading Company
Diamond Member Since 2020

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
1000000 RMB
Plant Area
101~500 square meters
  • MPET Series Zinc Alloy Quick Connection T-Type Pneumatic Fitting
  • MPET Series Zinc Alloy Quick Connection T-Type Pneumatic Fitting
  • MPET Series Zinc Alloy Quick Connection T-Type Pneumatic Fitting
  • MPET Series Zinc Alloy Quick Connection T-Type Pneumatic Fitting
  • MPET Series Zinc Alloy Quick Connection T-Type Pneumatic Fitting
  • MPET Series Zinc Alloy Quick Connection T-Type Pneumatic Fitting
Find Similar Products

Basic Info.

Model NO.
MPET
Usage
Air transport Screwdriver, Impact Wrench, Air Drill, Grinding Machinery, Air Compressor, Air Line
Brand
Homipneu
Work Temperature
-20--80
Material
Zinc Alloy
Transport Package
Bag Package
Origin
China
HS Code
3917400000
Production Capacity
3000000/M

Product Description

MPET Series Zinc Alloy Quick Connection T-Type Pneumatic FittingMPET Series Zinc Alloy Quick Connection T-Type Pneumatic FittingMPET Series Zinc Alloy Quick Connection T-Type Pneumatic FittingMPET Series Zinc Alloy Quick Connection T-Type Pneumatic FittingMPET Series Zinc Alloy Quick Connection T-Type Pneumatic FittingMPET Series Zinc Alloy Quick Connection T-Type Pneumatic FittingMPET Series Zinc Alloy Quick Connection T-Type Pneumatic Fitting

Tips for choosing a quick coupler

01: How to choose a quick coupler:
1. The connecting thread and pipe part are not allowed to pull or rotate, otherwise the thread or pipe connection will fall off. In the case of pulling or turning, a rotary joint should be used.
2. The bending of the pipe should be greater than the minimum bending radius, otherwise the pipe is easy to break.
3. Inflammable, explosive or toxic gases such as coal gas, gas fuel and refrigerant cannot be transported in the pipe
4. General industrial water can be used.
5. The impulse pressure should be prepared, not exceeding the maximum operating pressure, otherwise it is easy to damage.

02: How to install the quick connector?
1. Before installation, confirm the correct model and size, and confirm that the product has no cracks or scars.
2. The length of the connecting pipe will change considering the pressure change, so the length should be left margin.
3. The joint box tube is not allowed to be twisted or stretched, and bear a negative torque, so as to avoid the joint damage, the tube damage, cracking or falling off.
4. When piping and fittings are screwed in, do not mix the chips of the piping thread and the small pieces of sealing material into the pipe. When using the sealing tape, leave the thread head about 2 pitches free and not wrap the sealing tape.

03: In which environments are quick connectors used?
1. Do not use quick connectors in electrostatic sensitive occasions, which will cause poor system actions and malfunctions.
2. Do not use the quick connector in the occasions where sparks occur. Sparks may cause fire hazards.
3. Do not use it in an environment where cutting oil, lubricating oil and coolant are in direct contact with liquids.
 
Operating Pressure  0-1.0MPa | 0-150psi
Operating Temperature 0 - 60 °C
Medium Air - Water - Vacuum
Apply For  4/6/8/10/12/16mm tube/hose
Applicable Tube PU / PA / PE / PVC
Note 1.Due to the difference between different monitors, the picture may not reflect the actual 
color of the item.
2.Pay attention to the column of size and color, you could find a variety of product types 

and quantities for your choice,the more your purchase the best price you get. Thank you!


Contact us

Vivi Lian
 
 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier